viernes, 19 de marzo de 2010

GSM Network

Definition & Overview
Introduction: The Evolution Of Mobile Telephone Systems
GSM
The GSM Network
GSM Network Areas
GSM Specifications
GSM Subscriber Services
Self-Test
Correct Answers
Glossary
Comment On This Tutorial
GSM provides recommendations, not requirements. The GSM specifications define the functions and interface requirements in detail but do not address the hardware. The reason for this is to limit the designers as little as possible but still to make it possible for the operators to buy equipment from different suppliers. The GSM network is divided into three major systems: the switching system (SS), the base station system (BSS), and the operation and support system (OSS). The basic GSM network elements are shown in Picture 2.
Picture 2. GSM Network Elements
The Switching System
The switching system (SS) is responsible for performing call processing and subscriber-related functions. The switching system includes the following functional units.
home location register (HLR) - The HLR is a database used for storage and
management of subscriptions. The HLR is considered the most important database, as it stores permanent data about subscribers, including a subscriber's service profile, location information, and activity status. When an individual buys a subscription from one of the PCS operators, he or she is registered in the HLR of that operator.
mobile services switching center (MSC) - The MSC performs the telephony
switching functions of the system. It controls calls to and from other telephone and data systems. It also performs such functions as toll ticketing, network interfacing, common channel signaling, and others.
visitor location register (VLR) - The VLR is a database that contains
temporary information about subscribers that is needed by the MSC in order to service visiting subscribers. The VLR is always integrated with the MSC. When a mobile station roams into a new MSC area, the VLR connected to that MSC will request data about the mobile station from the HLR. Later, if the mobile station makes a call, the VLR will have the information needed for call setup without having to interrogate the HLR each time.
authentication center (AUC) - A unit called the AUC provides authentication
and encryption parameters that verify the user's identity and ensure the confidentiality of each call. The AUC protects network operators from different types of fraud found in today's cellular world.
equipment identity register (EIR) - The EIR is a database that contains
information about the identity of mobile equipment that prevents calls from stolen, unauthorized, or defective mobile stations. The AUC and EIR are implemented as stand-alone nodes or as a combined AUC/EIR node.
The Base Station System (BSS)
All radio-related functions are performed in the BSS, which consists of base station controllers (BSCs) and the base transceiver stations (BTSs).
BSC - The BSC provides all the control functions and physical links between
the MSC and BTS. It is a high-capacity switch that provides functions such as handover, cell configuration data, and control of radio frequency (RF) power levels in base transceiver stations. A number of BSCs are served by an MSC.
BTS - The BTS handles the radio interface to the mobile station. The BTS is
the radio equipment (transceivers and antennas) needed to service each cell in the network. A group of BTSs are controlled by a BSC.
The Operation and Support System
The operations and maintenance center (OMC) is connected to all equipment in the switching system and to the BSC. The implementation of OMC is called the operation and support system (OSS). The OSS is the functional entity from which the network operator monitors and controls the system. The purpose of OSS is to offer the customer cost-effective support for centralized, regional, and local operational and maintenance activities that are required for a GSM network. An important function of OSS is to provide a network overview and support the maintenance activities of different operation and maintenance organizations.
Additional Functional Elements
Other functional elements shown in Picture 2 are as follows:
message center (MXE) - The MXE is a node that provides integrated voice,
fax, and data messaging. Specifically, the MXE handles short message service, cell broadcast, voice mail, fax mail, e-mail, and notification.
mobile service node (MSN) - The MSN is the node that handles the mobile
intelligent network (IN) services.
gateway mobile services switching center (GMSC) - A gateway is a node
used to interconnect two networks. The gateway is often implemented in an MSC. The MSC is then referred to as the GMSC.
GSM interworking unit (GIWU) - The GIWU consists of both hardware and
software that provides an interface to various networks for data communications. Through the GIWU, users can alternate between speech and data during the same call. The GIWU hardware equipment is physically located at the MSC/VL.
 http://www.visualtron.com/gsm_topic03.htm

No hay comentarios:

Publicar un comentario en la entrada